富贵资源网 Design By www.hznty.com

Linux下/etc/network/interfaces文件用来配置网络接口。

初始化网口Ethernet Interface

大部分的网络接口配置都可以在/etc/network/interfaces中解决。例如为网卡配置静态IP(dhcp),设置路由信息,配置IP掩码,设置默认路由等。

PS: 如果想要在系统启动时就自动启动网口,需要添加auto一行,详见下面示例。

1. 使用动态IP地址

auto eth0
iface eth0 inet dhcp

2. 使用静态IP地址

auto eth0
iface eth0 inet static
  address 192.168.1.100
  netmask 255.255.255.0
  gateway 192.168.1.1
#  network 192.168.1.0
#  broadcast 192.168.1.255

network和broadcast一般使用默认值就行。

3. 查看路由表

# route
Kernel IP routing table
Destination   Gateway     Genmask     Flags Metric Ref  Use Iface
default     192.168.1.1   0.0.0.0     UG  0   0    0 eth0
192.168.1.0   *        255.255.255.0  U   0   0    0 eth0
# route -n
Kernel IP routing table
Destination   Gateway     Genmask     Flags Metric Ref  Use Iface
0.0.0.0     192.168.1.1   0.0.0.0     UG  0   0    0 eth0
192.168.1.0   0.0.0.0     255.255.255.0  U   0   0    0 eth0

route -n不解析名字。

以上就是小编给大家整理的相关内容,感谢大家的学习和支持。

富贵资源网 Design By www.hznty.com
广告合作:本站广告合作请联系QQ:858582 申请时备注:广告合作(否则不回)
免责声明:本站资源来自互联网收集,仅供用于学习和交流,请遵循相关法律法规,本站一切资源不代表本站立场,如有侵权、后门、不妥请联系本站删除!
富贵资源网 Design By www.hznty.com